Ironing Tips – The Only DIY Technique You Need to Know  

Imagine you have an important meeting tomorrow. You come out of the shower and open the cupboard, only to find none of your shirts has been ironed. Sounds frightening, right? 

Having an iron at home can be pretty handy to avoid these circumstances. But you know what else is needed?  

A sturdy ironing board. A high-quality board can make all the difference in how efficiently and comfortable you can finish the ironing. You can get the iron sand ironing boards from the stores too. But did you know that you can make the ironing board at home?  

With the extreme Australian weather, your clothes are bound to get sweaty and dirty, especially in summer.  

You can always get a professional ironing service for the job, but it would be best to know how to DIY it. It will be much easier and cost-effective in the long run since you only have to invest in a high-quality iron.   

 The Supplies You Will Need for Your DIY Ironing Board 

You are not just getting the ironing board to save cost and time. You might not have space for a full-size ironing board in smaller homes and apartments. Therefore, having a small, portable board for the job is much more convenient.  

You can easily get the supplies to make the board from your local stores. Here is a list of the things you will need: 

  • A piece of plywood  
  • A piece of thick cotton batting  
  • Some extra double-layered fabric (the thicker, the better) 
  • A pair of scissors  
  • A staple gun  

The essential supply from this list is the piece of plywood, so make sure to choose a high-quality one. Also, figure out the size of the ironing board you need, and get plywood of that precise size. It is better to get a pre-cut size once you have the correct measurements. This will save you the hassle of cutting the wood into your desired shape.  


How to Make Your Own Ironing Board  

Now that you have gathered all the necessary supplies, you can begin the DIY process to have your own iron sand ironing boards. Here are the following steps:  

  • Place the fabric: Position the fabric by folding it in half. Then place the cotton batting and the plywood on top of it. Make sure that the side for the ironing board is facing downward at this point.  
  • Wrap the batting and fabric around the board: Fold the batting and the fabric over, from one long side to the other. Staple it a few times to ensure the layers stay fixed.  
  • Fold over the other side: Cut off the excess part and fold the plywood to the other side. Tuck the edges in and staple it again to hold everything in place.  
  • Trim the bulk: Trim the excess parts using scissors. You may need to repeat this process multiple times during the folding stages.  
  • Pull the corners flat: Pull the corners to make them flat and then staple them. You might need to trim the excess cotton batting to make the surface even. Make sure there are no hanging or loose ends.  
  • Staple the corners: Finally, staple everywhere on the back side to ensure the fabric is tightly hugging the board.  


The iron sand ironing boards are a must-have for every household. Making the ironing board by yourself is easy too.  

Follow the tips above and gather all the supplies listed in this article. You can then perform all the steps to the tee and have a sturdy ironing board in no time. You will never have to worry about unironed shirts again! 





Related Articles

Antalya escort

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
hosting satın al minecraft server sanal ofis xenforo