Imagine, you were ever under a scorching sun and heading to home to take a sign of relief under AC. Unfortunately, you found that the AC is not working. How irritating and daunting this can be, adding up more into your headache and into your sweat. Such issues may need low ac pressure fix or have leaking ducts, many other issues are possible as well.
However, a house or company with air conditioning issues, it’s not a pleasant experience. Don’t take chances with your summer comfort!
Learn about the frequent causes of air conditioner problems and how you can avoid costly repairs.
The following are the top reasons for air conditioner malfunctions.
Issue of a low refrigerant
The refrigerant is the part that your air conditioner uses to extract heat and humidity out from the air in your house or office. If refrigerant lines in your unit leak, you may not have enough refrigerant to adequately chill the air.
Unfortunately, changing the refrigerant is not the only solution to this air conditioning unit problem. Finding the leaks and repairing the holes in the pipes requires an HVAC repair professional. This can be a time-consuming and costly task, especially if there are several leaks.
The issues of frozen evaporator coils
The evaporator coil of your air conditioner is packed with refrigerant and is in charge of collecting heat out from the air just like a sponge. Although it may seem counterintuitive, those coils require warm air to function correctly.
When the airflow disrupts and the evaporator coil becomes too cold, a film of ice can form on the exterior. When this happens, your air conditioner supply registers will either blow warm air or no air at all.
The trouble of dirty condenser coils
The heat that comes out from the air of your room goes outside the premises by your unit’s condenser coils, which are part of the outside unit. When the condenser coil gets a layer over with dirt and grime, it will not function properly.
With all of the smoke and pollution in the air, this is a pretty prevalent condition in NYC. Heat transmission hampers as a result. Your unit has to put more effort to complete its function. This results in greater wear on the parts and potentially system failure.
Filter that is dirty
Filters that are dirty can create a variety of issues. These include lower airflow, poor indoor air quality, and increase in energy use. They can also end up making your air conditioning unit work a lot harder and, if the coil freezes, cause it to cease operating.
With air filters, you can simply avoid AC difficulties. Flat filters should get a change once a month, and pleated filters should get every three months.
Problems with fans
A fan blows air over the evaporator coil of your AC unit to cool it, and then another blows air over the condenser of your outdoor unit to discharge the absorbed heat out from the building.
If any of those fans is really not performing properly. This can be due to a faulty motor, a lack of oil, worn belting, or too much dirt and debris. These will result in poor airflow and air conditioner difficulties. It may need a low ac pressure fix or an urgent repair service. If you ignore the issue, this may lead to compressor damage, which is usually the end of your air conditioner’s life.
Duck leaking issues
The chill air from the air conditioner moves throughout your area through ductwork that extends through your walls and ceilings. However, if the ducts have holes or cracks (which are possible via mice or negligent workers), that costly cooling air will end up within your walls, where it will do no good.
This scenario, of course, makes your air conditioning unit work harder and raises your energy expenditures.
Issues with thermostat
It’s possible that your ancient dial-type thermostats are poorly set. This means your air conditioner isn’t getting the necessary signals from the control system. By replacing or resetting your thermostats, you may easily solve this problem.
If you have just got programmable thermostats, they can be difficult to configure and may be set improperly. Check the directions in the handbook if you still have it to ensure your thermostat’s settings are accurate.
Issues with clogged drains
All of the moisture in the air that your air conditioner eliminates has to go someplace. It should drain out of the area via a drain line, into a pan, and then down the drain. Water may back up and harm your system if the pipe or drain becomes clogged or the pan becomes full.
Water leaks can also cause damage to your wall surfaces, ceilings, and furnishings. If you don’t spot mold right away, it will eventually develop and grow.
Problems with a tripped circuit breaker
There are a few reasons why your air conditioner’s circuit breaker is regularly tripping. Some common reasons include:
- A dirty or jammed air filter drastically restricts airflow.
- Due to a shortage of refrigerant, your air conditioning unit is overheating.
- Dirty condenser coils are obstructing airflow.
- The condenser fan motor is failing, causing the coils to overheat.
- There are weak or faulty electrical connections.
- The blower motor is faulty.
- Compressor is consuming too much electricity, or the wiring is damaged.
- The capacitor that controls the compressor’s start-up is failing.
- Ac needs a low ac pressure fix.
As previously said, keep a look at your air filter first. This is because it is the typical source of the problem. Any additional issues would require the services of a professional HVAC company such as acflo.
Simple measures to avoid air conditioner issues
- Replace the dirty air filter ASAP. Blocking air filters are a common source of air flow difficulties that cause coils to freeze.
- Regularly check ducts for holes. If it appears that there isn’t enough air flowing from the vents. If your house or workplace energy bills continue to grow, get a duct check by an HVAC expert.
- Get a programmable thermostat and learn how to use it. Install new thermostats to replace older process control. These are more accurate and save energy. Thermostats that may be set remotely via your smartphone or tablet are also available.
- Clean the outdoor unit from brush, trash and debris. The condenser and outside fan unit can’t release heat as adequately when they’re full with leaves, garbage, and dirt.
- Do not forget the regular upkeep and maintenance of your ac unit. Regular maintenance may almost eliminate all of the prevalent causes of air conditioner issues. Before turning on your system for the first time in the spring, have an HVAC professional examine it, do a low ac pressure fix and tune it up. It’s affordable, and you’ll avoid having to call for help when your air conditioner breaks down on the hot days of the year.Read More : How To Choose The Right Membrane Filter Plate?
